RS485 / RS422 to USB-Adapter-Kit
This USB to Serial Converter allows you to connect any RS485 or RS422 device directly to your computer’s USB port.
- One RS422/485 Port over USB Port
- Easy Serial Port Expansion over USB Port
- Integrated switchable termination resistor
- Compact Size
$140.00
excl. sales taxes, custom tariffs and shipping
Product Description
This USB to Serial Converter allows you to connect any RS485 or RS422 device directly to your computer’s USB port. RS485, a standard for serial communication, is widely used in industrial automation due to its robustness, long-distance capability (up to 1200 m / 3937 ft), and high-speed data transmission. It uses differential signaling to ensure reliable communication in noisy environments.
- One RS422/485 Port over USB Port
- Easy Serial Port Expansion over USB Port
- Integrated switchable termination resistor
- Compact Size
Specification
General Specifications
Operating temperature range: 0 °C to 50 °C (32 °F to 122 °F)
Storage temperature range: -40 °C to 70 °C (-40 °F to 158 °F)
Relative humidity: 10 – 95 %, non-condensing
Environmental rating: IP30
Weight: 40 g (with cable and terminal block)
Size: 45.5 x 20.3 x 10.4 mm (1.79 x .8 x .41 in)
Material: Plastic
Color: white
Interface Specifications
Cable Type: USB2.0
Connector: 3-pin terminal block, 1.5qmm
Downloads
FAQs
What is the difference between RS422 and RS485?
RS485 can have multiple commanding devices and multiple listening devices. RS422 can have only one commander and multiple listeners.
How do I change the 120Ohm termination resistor?
To change the termination resistor, locate the USB adapter where it’s integrated. Then, switch it to the desired setting to properly set the impedance of the RS485 network.
When do I have to use the termination resistor?
The 120Ohm resistor must be set at the last unit’s end of the communication chain.
Does the adapter work with pyrometer and infrared cameras from Optris?
Yes, this adapter is compatible with the infrared camera and pyrometer that support the RS485 serial communication.
Where do I find the corresponding command list for the infrared cameras and pyrometer?
The command list can be found either here on the website or in the software installation folder.
How many sensors can I connect in one network?
Up to 32x units can be connected to one RS485 interface.
Scope of Supply
- 1x RS485/422-USB adapter
- 1x Terminal block
- 1x USB extension cable (40 cm / 15.87 in)
- 1x Software-USB stick
- 1x Quick reference
Talk to us about your IR Temperature Measurement Requirements
Our Infrared Temperature Measurement experts can help you find the right Optris product for your application.
